Starting to send emails from a new domain? Do not immediately send your entire list. GoHighLevel email warm-up helps you introduce sending activity gradually, build a reputation with mailbox providers, and reduce the risk of deliverability problems.
I'll walk you through domain setup, warm-up options, sending schedules, authentication, and the checks you should complete before increasing your campaign volume.
Important for 2026: HighLevel's documentation now describes fixed-stage domain warm-up and an automated warm-up feature that has been rolling out in beta. Availability and behavior can vary by account. Check your own Email Services settings before following a particular interface or assuming a feature is enabled.
Email warm-up is the process of gradually increasing email sending activity from a new or previously inactive sending domain. The goal is to establish a consistent, trustworthy sending history with providers such as Gmail, Outlook, and Yahoo.
Mailbox providers evaluate more than the number of messages you send. They can consider authentication, sending patterns, recipient engagement, invalid addresses, spam complaints, and other signals when deciding how to handle incoming mail.
If a domain suddenly starts sending thousands of marketing emails without an established history, that unusual activity can create deliverability problems. Messages may be filtered into spam, delayed, or rejected.
Warm-up gives you a more controlled way to begin sending. It does not guarantee inbox placement, and it cannot repair every reputation problem. You still need a legitimate audience, relevant content, and correct domain authentication.
Start with a verified sending domain, a small volume of legitimate messages, and recipients who have opted in and are likely to engage.
Review recent sending history, bounces, complaints, and available reputation data before increasing volume or changing your sending setup.
Maintain a sensible sending pattern instead of alternating between long periods of inactivity and sudden large campaigns.
Review sending domains separately for each relevant sub-account. HighLevel advises against sharing dedicated sending domains across sub-accounts.
If you are still configuring the platform, start with our GoHighLevel email setup guide. For the wider marketing picture, see GoHighLevel email marketing.
HighLevel has documented multiple domain warm-up approaches. It is important to distinguish the general warm-up process from specific features that may not be available in every account.
HighLevel documents a staged system for eligible dedicated sending domains. Sending volume is managed against daily thresholds, with progression depending on the domain's stage and activity.
HighLevel's documented model has 15 stages, but the feature's availability and exact behavior should be checked in your account.
HighLevel has also documented an automated warm-up feature in beta. It uses platform-managed warm-up mailboxes and gradually increases activity toward a selected daily goal.
Beta access may require approval. Do not assume you can use it simply because it appears in the documentation.
Regardless of the features available, you still need to control the volume of real campaign emails, use eligible contacts, monitor performance, and avoid sudden spikes.
If your account uses an external SMTP provider, follow that provider's instructions. HighLevel's LC Email warm-up tools and support may not apply to an external sending service.
HighLevel's automated warm-up feature is designed to run alongside normal sending. Its warm-up mailboxes are platform-managed identities, not your customer contacts. You should still check the account's instructions and reports before enabling the feature.
Do not confuse warm-up with sending marketing emails to yourself. Artificially emailing a collection of your own accounts, repeatedly opening messages, or creating fake engagement is not a substitute for a legitimate sending strategy. Use only the warm-up functionality supported by your provider and send real campaigns to recipients who want them.
Before you warm up a domain, make sure it is configured correctly. The exact menus depend on whether you use LC Email or an external SMTP service and whether you are working in the agency account or a sub-account.
Use a domain or subdomain appropriate for your business email sending. Many businesses use a dedicated subdomain such as mail.example.com to separate marketing activity from other email uses.
For LC Email, the documented navigation generally starts at Settings → Email Services in a sub-account, or the corresponding agency settings for an agency-managed domain. Look for the dedicated sending domain settings.
Follow the DNS instructions displayed for your domain. Add the requested records at your DNS provider, allow time for propagation, and use the verification option in HighLevel to check the records.
Set a recognizable sender name and a valid From address associated with your business domain. Make sure the sender configuration aligns with your authenticated sending domain.
Depending on feature availability, look under Settings → Email Services → SMTP Service → Dedicated Domain and IP. Check whether warm-up is already active, whether a stage is displayed, or whether an automated warm-up option is available.
If the account offers a warm-up action, read the displayed instructions and confirm the recommended starting point. Automated beta warm-up may require separate access and a verified domain with its SSL certificate issued.
Review sending activity, domain reputation, bounces, complaints, and any available warm-up reports. Do not increase volume just because a certain number of days has passed.
For the current procedure, read the official HighLevel dedicated sending domain setup guide.
There is no single sending schedule that fits every domain. A new domain with no sending history should be treated differently from an established domain with a consistent record of legitimate email activity.
HighLevel's documented manual warm-up recommendations use stages with hourly and daily limits. Its published guide identifies Stage 1 as allowing up to 100 emails per hour and 1,000 per day, and Stage 2 as allowing up to 300 per hour and 2,500 per day.
These are documented stage limits, not a recommendation to immediately send that many messages. HighLevel advises staying below the maximum where possible and following the instructions for the stage and sending service that apply to your account.
| Warm-up situation | Recommended approach | What to check |
|---|---|---|
| Brand-new sending domain | Start conservatively and follow the active warm-up limits. | Authentication, engagement, bounces, and complaints. |
| Established domain with a good history | Review historical volume and the platform's recommended stage before increasing sends. | Recent activity and reputation data. |
| Domain with recent delivery problems | Investigate the cause before attempting to increase volume. | DNS, authentication, blocklists, bounces, and complaints. |
| Automated warm-up enabled | Follow the feature's setup and reporting instructions. | Warm-up status, daily goal, health, and deliverability. |
| External SMTP provider | Use the external provider's warm-up rules. | Provider limits and sender reputation. |
For a new domain, think in terms of controlled progression rather than a fixed promise such as "send 100 emails on day one, 500 on day two, and 5,000 on day three." That kind of generic schedule may be unsuitable for your domain and can conflict with the limits displayed in your account.
Do not assume that a warm-up tool's daily goal means you can immediately send 10,000 real campaign emails. The goal in an automated warm-up feature refers to its warm-up process, while your actual campaign sends remain subject to the platform's sending rules, domain health, and your recipient list's quality.
If your business eventually needs to send thousands of messages, build toward that volume using legitimate, opted-in contacts and consistent sending activity. Review your account's current stage limits and available sending capacity before scheduling a large campaign.
Allow several weeks as a planning estimate, but do not treat a particular number of days as a guarantee that a domain is ready for unrestricted sending.
HighLevel's general email sending guide describes a warm-up period of around four weeks. The time required can vary based on the domain's history, sending volume, engagement, authentication, and the warm-up system available to your account.
Its fixed-stage model also uses progression thresholds, so stage completion depends on the relevant sending activity and platform rules rather than simply waiting a set number of days.
Use these principles to decide when to progress:
Warm-up is not a one-time task that makes future campaigns automatically safe. Continue following good sending practices after the initial period.
Authentication helps receiving providers check whether messages are authorized to use your domain and whether the message aligns with your domain's policies.
Follow the DNS records and authentication instructions generated for your sending setup. Avoid adding duplicate SPF records or copying another provider's DNS values without checking your existing configuration.
For a practical overview, use the official HighLevel email best practices and warm-up guide.
Use contacts who knowingly signed up for your emails or otherwise meet the requirements for the communication you are sending. People who recently requested a resource, subscribed to updates, or asked for information are often more appropriate than old, inactive records.
Do not use warm-up as an excuse to send unsolicited cold emails. HighLevel explicitly warns that cold emailing during warm-up can harm deliverability.
Send messages that match the recipient's expectations. A useful welcome message, requested resource, or relevant update is a better starting point than a generic blast to a large, unverified list.
Keep your copy clear, use a recognizable sender name, and avoid misleading subject lines. Do not use public URL shorteners such as bit.ly in early warm-up emails if you can link directly to the destination.
A hard bounce usually indicates that an address does not exist or cannot accept the message. Remove hard-bounced contacts from future sending. A soft bounce may result from a temporary issue, so review repeated failures rather than treating every temporary problem as permanent.
Do not keep retrying invalid addresses in an attempt to reach a volume target. Poor list quality can damage the reputation you are trying to establish.
Make the unsubscribe process easy to find and ensure opt-outs are honored. If recipients complain about your messages, stop and investigate why they received them. Review signup sources, message relevance, frequency, and consent records.
Check that your campaigns and workflows use the correct suppression and exclusion rules. A well-configured email system should not continue marketing to contacts who have opted out.
Frequent, extreme swings in sending volume can make your activity look unusual. Plan campaigns around your genuine audience and business needs. If you normally send a small number of emails, do not jump to a massive campaign without an appropriate warm-up and capacity review.
Use the reporting tools available for your sending configuration to identify problems early. Depending on your account and integrations, HighLevel may provide a domain status, warm-up stage, sending volume information, and domain health or deliverability reports.
Review the health indicators available for your domain. Treat a poor score or warning as a reason to investigate, not as a number to ignore while sending more email.
Check the displayed DNS status for SPF, DKIM, DMARC, and other required records. Correct missing or invalid records using your provider's instructions.
Where reports are available, review whether warm-up messages are landing in the inbox or being filtered. Results can vary between mailbox providers.
Watch for delivery errors, bounces, and complaint signals. Investigate unexpected changes before continuing to increase volume.
For broader monitoring, HighLevel recommends tools such as Google Postmaster Tools, which can provide data about Gmail domain reputation, spam rates, authentication, and delivery errors when sufficient data is available.
You can also use an email testing service to inspect a sample message and an email health checker to look for common DNS and blocklist issues. These checks are useful diagnostics, not guarantees that every future campaign will reach the inbox.
If messages continue landing in spam, do not automatically increase your warm-up volume. First determine whether the problem comes from authentication, list quality, sending behavior, content, or a reputation issue.
If a sending domain has a badly damaged reputation, HighLevel's documentation suggests that setting up a new subdomain may be preferable to trying to repair the damaged one. However, a new domain is not a shortcut around poor sending practices. Fix the underlying problem before sending from a replacement domain.
For additional help, read HighLevel's official email sending and troubleshooting guide.
Warm-up prepares your sending infrastructure and helps you establish a reputation. Campaigns and workflows determine what your business actually sends to its audience. You need to manage both.
Use campaigns for newsletters, promotions, product updates, and announcements. During warm-up, make sure any real campaign is appropriate for your current sending capacity and audience.
Workflows can send welcome emails, lead follow-ups, booking confirmations, and other messages after configured triggers. Review their timing and volume so they do not unexpectedly add large amounts of email activity.
Templates help you create consistent, readable messages. Check every link, personalization field, sender detail, and unsubscribe option before using a template in a real campaign.
Use appropriate segments and exclusions to reach the right people. Keeping your list relevant helps avoid unnecessary messages and makes campaign performance easier to understand.
Imagine a small agency preparing to send a monthly newsletter to a permission-based list. Its domain is new, and the agency has not previously sent marketing email from it.
| Phase | What to do | What not to do |
|---|---|---|
| Preparation | Verify the domain, authenticate it, check the sender address, and clean the list. | Upload an unverified or purchased contact list. |
| Early sending | Follow the warm-up system and send relevant messages to eligible contacts. | Send the entire newsletter list at once just to test capacity. |
| Monitoring | Review delivery results, complaints, bounces, and available reputation data. | Ignore warnings because the platform accepted the send. |
| Progression | Increase volume only when the applicable stage rules and domain health support it. | Follow an arbitrary daily schedule that conflicts with account limits. |
| Ongoing campaigns | Keep a consistent sending pattern and review performance after each campaign. | Assume warm-up permanently guarantees inbox placement. |
This approach is more useful than trying to reach a large number of sends as quickly as possible. Your objective is to establish healthy sending behavior that can support the business over time.
GoHighLevel is worth considering if you want email sending, contact management, campaigns, and workflow automation in one platform. Its built-in email service and documented warm-up options may be useful for agencies and businesses managing ongoing customer communication.
Before choosing a plan, check which email sending service your account will use, whether dedicated sending domains are supported, and whether the warm-up functionality you need is available to you.
If you already use an external SMTP provider, compare its warm-up instructions and support arrangements with HighLevel's LC Email options. Moving providers does not automatically solve a reputation problem, and changing your sending infrastructure should be planned carefully.
Review the platform's current features, email configuration options, and pricing. Confirm the email-related charges and account capabilities that apply to your intended use before making a decision.
It is the process of gradually establishing sending activity and reputation for an email domain. HighLevel documents staged warm-up and an automated warm-up feature in beta, with availability depending on the account and rollout.
HighLevel documents automatic fixed-stage warm-up for eligible domains and has also documented a separate automated warm-up feature in beta. The exact behavior and access depend on your account. Check your Email Services settings and current documentation.
HighLevel's general guide describes around four weeks as a typical planning estimate. The actual time depends on sending history, domain health, volume, and the warm-up system used. Time alone does not guarantee readiness.
It depends on your active warm-up stage, account configuration, and sending provider. HighLevel's documented manual schedule lists Stage 1 limits of up to 100 per hour and 1,000 per day, and Stage 2 limits of up to 300 per hour and 2,500 per day. Follow the limits shown in your own account and stay below the maximum where appropriate.
HighLevel's automated warm-up documentation says normal campaign and workflow sending can continue while warm-up runs. Your real campaign sends still need to follow the account's sending limits and responsible sending practices.
HighLevel recommends a dedicated sending domain for LC Email users. It gives your business a separate sending identity and helps you manage its reputation. Follow the provider's setup instructions and verify the required DNS records.
No. Warm-up can help establish a sending history, but inbox placement also depends on authentication, sender reputation, contact quality, complaints, content, and recipient-provider filtering.
No. Use permission-based contacts who are likely to engage. HighLevel warns that cold emailing during warm-up can harm deliverability. Do not use unsolicited bulk email as a substitute for a legitimate warm-up process.
Follow your external provider's warm-up and deliverability instructions. HighLevel's LC Email-specific warm-up tools may not apply, and its ability to troubleshoot external sending services can be limited.
HighLevel advises against sharing dedicated sending domains across sub-accounts. Review each client's sending setup separately and follow the platform's current recommendations for account isolation.
Investigate authentication, invalid addresses, complaint rates, sending spikes, and list sources before increasing volume. HighLevel's documentation notes that a new subdomain may be preferable when a sending domain's reputation is badly damaged. Correct the underlying practices before sending again.
Final takeaway: GoHighLevel email warm-up is about building a healthy sending history, not finding a shortcut to sending unlimited emails. Verify your domain, follow the warm-up limits available in your account, send to people who want your messages, and monitor delivery results before increasing volume.
This article is for educational purposes and is not legal or deliverability advice. HighLevel features, beta access, navigation, limits, and pricing can change. Confirm current instructions in your own account before making changes to your sending configuration.